Expert Answers about Saturn Folding Trailer Tongue

• Replacement Bolt And Pin For Fold Away Tongue Trailer Coupler
• For your Fourwinns Trailer with fold away tongue, we have complete kits based on frame size like the Fulton Fold-Away Coupler Hinge Kit for 3" x 3" Tongue - Bolt On - Up to 5,000 lbs # FHDPB330301. We don't carry the individual bolts, but we do carry one size of pin, the Replacement Pivot Pin for Fulton Coupler Hinge Kits - 5/8" x 6-1/2" Long # F500336. For the page of all the complete kits, I've attached the page to coupler hinge kits for folding tongue trailers.
  view full answer...


• Can I Replace An Aluminum Trailer Tongue With A Galvanized Tongue To Add A Fold-Away?
• While it certainly is possible to replace the aluminum tongue on your trailer with a galvanized tongue, we do not carry any kind of parts or adapters for this purpose. So all of this is provided you have a fabricator that is able to do that kind of work. The main concern there is the risk excessive corrosion, due to the contact of dissimilar metals, which can cause problems in the long run. In this case there is really no way around this, so it will ultimately be up to you to decide is...
  view full answer...


• Replacement Solution for Fulton Swing Away A60 Drum Brake Actuator
• For a replacement I recommend the Dexter DX7.5L A-60 Brake Actuator # DX27FR. The swing-away actuators like your old A60 have been discontinued, along with replacement parts, so this is the best solution. This features a 7,500 lb trailer capacity, bolt-on installation, and is designed for trailers with drum brakes. To retain the folding tongue you can use the the Fulton Fold-Away Coupler Hinge Kit for 3" x 4" Tongue # FHDPB340301 which fits 3" x 4" diameter tongues. This will allow you...
  view full answer...


• Replacement Clevis Pin for Fulton Fold-Away Coupler Hinge Kit
• We offer two clevis pins that come close to the dimension you're looking for. The # MT70053 measures 5/8 of an inch in diameter and 3-5/8 inches long. Part # 586H measures 5/8 by 6 inches long. If you were looking for a replacement clevis pin for the Fulton folding trailer tongue, we only have one size, the pin for a 3x5 tongue, # F500336.
  view full answer...


• Replacement for ACT-7.5K Actuator on Mastercraft Boat Trailer
• For a replacement option I recommend the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout # DX89FR. Any swing-away actuators like your ACT-7.5K have been discontinued so this is the best solution. This has a 7,500 lb trailer capacity, is designed for trailers with disc brakes, and is a bolt on replacement. More than likely you will also need a replacement swing away tongue adapter like the Fulton Fold-Away Coupler Hinge Kit for 3" x 4" Tongue # FHDPB340301 which fits 3" x 4" diameter...
  view full answer...


• Replacement Mounting Hardware For Fulton Fold-Away Trailer Coupler Hinge
• The only way we have the mounting bolts that you are looking for is with the Fulton Fold-Away Coupler Hinge Kit # FHDPB340301 for 3"x4" trailer pole tongues or # FHDPB330301 for 3"x3" trailer pole tongues. You may be able to find the hardware from a local specialty hardware store. Be sure to get grade 5 bolts for the strength rating.
  view full answer...


• Selecting Replacement Boat Trailer Coupler for Four Winns Trailer
• If you are referring to a folding coupler hinge to allow for easier trailer storage, like part # FHDPB350101 that you referenced, we do offer a range of bolt-on and weld-on types in various weight capacities and designed for several tongue sizes. All such folding couplers can be seen on the link provided. You can sort the results using the filters in the left-hand margin. If you are referring to a coupler to attach to your hitch ball we offer straight tongue couplers and brake actuator...
  view full answer...


• Replacement Ramp for Thule EasyFold XT Bike Rack
• For the Thule EasyFold XT Bike Rack, # TH903202 we have the Extra-Long Loading Ramp for Thule EasyFold XT, # TH933402. This ramp attaches to grooves on end of each ramp tray, no need to modify.
  view full answer...


• Replacement Flexible Brake Line For a 1999 Four Winns Single Axle Boat Trailer With Removable Tongue
• Typically these types of trailers will use a flexible line like the Kodiak # bh-3mfs-1-5 inside the removable or folding tongue. You will need to measure the length of hose needed as this line is 18" overall with 3/16" fittings. Please let me know if you need a longer or shorter length or have different fitting sizes as I have no way to know what Four Winns put on your trailer. The same goes for the wiring harness. I need to know if the wiring goes to a junction box or if they use push...
  view full answer...


• Replacement Fold Away Surge Brake Coupler for Disc Brake Trailer
• I do have a recommendation as Titan no longer makes their brake actuator with the fold away tongue hinge you are looking for. You will be able to use either a 3"x4" Hinge # FHDPB340301 with the Dexter DX7.5L A-60 Brake Actuator # DX29FR. Or we have the 3"x5" Hinge # FHDPB350101 with the Dexter DX7.5L A-60 Brake Actuator # DX56FR. You will need to acquire a short leg of either the 3"x4" or 3"x5" tubing for connecting the hinge kit to the actuator.
  view full answer...


• Replacement for ACT 7.5 Surge Brake Actuator on 2008 MasterCraft Boat Trailer
• For a replacement I recommend the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout # DX29FR. The Titan you're referring to was discontinued several years ago, and there are no other swing-away options available. The # DX29FR has a 7,500 lb trailer capacity and is designed for trailers with disc brakes. You will also need a replacement swing away tongue adapter like the Fulton Fold-Away Coupler Hinge Kit for 3" x 4" Tongue # FHDPB340301 which fits 3" x 4" diameter tongues. I have attached...
  view full answer...


• Replacement Surge Brake Actuator For Trailer W/ Older Swing Away Actuator For Disc Brakes
• Thank you for the pictures! For a replacement option I recommend the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K # DX29FR to replace your current actuator. The # DX29FR has a 7500lb trailer weight rating, is designed for trailers with disc brakes, and is a bolt on replacement. You will likely also need a replacement swing away tongue adapter like the Fulton Fold-Away Coupler Hinge Kit for 3" x 4" Tongue # FHDPB340301 which fits 3" x 4"...
  view full answer...


• Replacement Jack Options For a NAPA Trailer Tongue Jack # 8215214
• Unfortunately, the only information I could obtain from NAPA regarding your 8215214 tongue jack is it is rated for a 5,000lb lift capacity, is 14-1/5" tall and has a top wind handle. The Bulldog # BD171401 is going to be the closest option but you will need to verify your jack has the 2-5/16" Snap Ring # BD500241. A better option would be to switch to the Trailer Valet JXS Trailer Jack # TV64FR. This jack is also rated for 5,000lbs and bolts onto a frame up to 4-3/4" tall and 3-3/4" deep....
  view full answer...


• Replacement Foot For FIC-ETJ350 Trailer Tongue Jack 2021 Forest River Rockwood Travel Trailer
• I do have a couple options for you as I am unable to find any dimensions online for your foot on the FIC-ET3500 electric tongue jack. First is the Valterra Trailer Jack Stand # A10-0900 which you can place down below the jack when you disconnect your camper. This is 8-3/8" tall to greatly reduce the amount of time it takes to disconnect your camper while also increasing height. Another option if you prefer something mounted to the jack is the Fastway Flip Foot # FA88-00-6500. This is...
  view full answer...


• Replacement Actuator for ACT-7.5K Disc Brake Actuator
• For a replacement option I recommend the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K # DX29FR. The swing-away actuator you are referencing was discontinued and there is no direct replacement. The # DX29FR has a 7,500 lb trailer capacity, is designed for trailers with disc brakes, and is a bolt on replacement. More than likely you will also need a replacement swing away tongue adapter like the Fulton Fold-Away Coupler Hinge Kit for 3" x...
  view full answer...


• What Size is the Pivot Bolt on the Fulton Fold-Away Bolt-On Hinge Kit Part # FHDPB330301
• The pivot bolt included with the Fulton Fold-Away Coupler Hinge Kit part # FHDPB330301 is a 5/8"-11x4-1/2" grade 8 hex head bolt which can be acquired at most local hardware stores.
  view full answer...


• Replacement Anti-Sway Hardware for a Yakima FullSwing or BackSwing Trailer Hitch Mount Bike Rack
• There is only one version of the SwingDaddy introduced in 2008. There was a product called the BackSwing from 2004 to 2007 and the FullSwing from 2004 to 2008 (the SwingDaddy then replaced the FullSwing). For the BackSwing or FullSwing you would need # Y8780022.
  view full answer...


• Swing-Away 2-Inch Drum Brake Actuator Coupler to Replace Discontinued Fulton A60
• The Fulton A60 series surge couplers are now obsolete and since parts are no longer available for them I suggest you replace the unit with a new brake actuator like the Dexter # 099-175-00 (drum) or # 099-175-20 (disc). This bolt-on coupler fits a 2-inch ball, mounts on a 3-inch wide channel tongue with bolt holes that are 3-inches on centers and is rated for 7500-lbs gross trailer weight. You can see more on this item in the linked video. To create a foldaway tongue up to 48" long,...
  view full answer...


• What Size Bolt Does the 3" x 3" Fulton Fold-Away Coupler Hinge Kit Use
• The pivot bolt that comes with the Fulton Fold-Away Coupler Hinge Kit part # FHDPB330301 is a 5/8"-11 x 4-1/2" grade eight hex head bolt. If you need this replaced then I recommend a trip to your local hardware store. That said, if there was enough force to break the bolt then odds are there was damage to the hinge mechanism, even if it's not readily apparent. Therefore, I recommend simply replacing the entire kit as it's not something you can afford to have fail while traveling down the road.
  view full answer...


• Replacement Shock Absorber For UFP A-75 Brake Actuator
• I believe you meant UFP A-75 with a Fulton swing-away tongue, and the reason I say that is there isn't a Fulton A75 brake actuator. So if you were indeed referencing a UFP A-75 actuator, we do have the correct replacement shock absorber: - Replacement Shock Absorber Spring Kit for Titan/UFP Brake Actuators # TK71-758-00 I was able to verify with the manufacturer that the # TK71-758-00 is indeed the correct replacement for the UFP A-75.
  view full answer...